南京航空航天大学 机械结构及控制国家重点实验室 南京 210016
TN081 TP311.5
国家自然科学基金（51305197) 、江苏高校优势学科建设工程基金项目资助
State Key Laboratory of Mechanics and Control of Mechanical Structure, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
创造性地将智能语音控制与振动数据采集系统结合起来，提出一种智能语音控制的振动数据采集系统设计方案，通过一个具体的编程案例加以实现，并通过GARTEUR飞机模型的响应试验与NI公司的signalexpress软件进行对比，从而验证系统的可行性。基于LabVIEW的智能语音控制振动数据采集系统设计，包括整体框架设计、语音控制和播报系统设计、语音命令设计、语音命令容错性设计等内容。通过智能语音控制，实验人员可在安装试验件的同时，语音设置数据采集参数，提高了工作效率；语音播报的加入，可进行软件操作提示及实时数据播报，从而降低操作难度，方便使用。
In this paper, we combine the intelligent voice control with the vibration data acquisition system, and propose a design scheme of the vibration data acquisition system of the intelligent voice control, which is realized by a specific programming case. Through the response experiment of the GARTEUR model, to verify the feasibility of the system compared with the signalexpress. Design of intelligent speech control vibration data acquisition system based on LabVIEW, including the overall framework design, speech control and broadcast system design, speech command design, speech command fault tolerance design and so on. Through the intelligent voice control, the experimenter can install the test pieces at the same time, voice settings data acquisition parameters, improves work efficiency. Voice broadcast can be software operation prompts and realtime data broadcast, thus reducing the difficulty of operation, easy to use.
梁忠仔,姜金辉,陈洋,蒋轶.基于LabVIEW的智能语音控制振动数据采集系统设计[J].国外电子测量技术,2017,36(2):63-68
复制
