基于STM32的远程定位与监控终端的设计
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP2

基金项目:


Design of remote positioning and monitoring terminal based on STM32
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    根据当今安防的实际需求,设计了一套以ARM为平台,结合GPS技术、GPRS技术和图像采集技术的远程定位与监控终端。当检测到外界突发信号,比如强冲击或者人工按钮被按下,终端将采集到的GPS定位信息和图像信息通过GPRS网络实时传输到监控中心,同时发送报警信息到用户手机,监控中心也能通过发送查询指令,实时获取定位数据和图像信息。该系统具有低成本、高性能、高可靠性等优点,实现了智能报警、远程定位与监控功能。实验运行结果表明,系统定位和监控功能满足实际使用要求。

    Abstract:

    Based on the actual demand of the modern security, a set of remote positioning and monitoring terminal taking ARM as the platform is designed in this paper, which combines with GPS technology, GPRS technology and image acquisition technology. When detecting burst signal outside, such as strong impact or manual buttons were pressed, terminal transmits the GPS positioning information and the image information collected through the GPRS network to the monitoring center in real time, and sends alarm information to the user's mobile phone at the same time. The monitoring center can obtain the positioning data and the image information in real time by sending the inquiry instruction. This system has the advantages of low cost, high performance, high reliability, can realize the function of intelligent alarm, remote positioning and monitoring. The results of the actual operation indicate that the function of positioning and monitoring can meet the requirements of practical use.

    参考文献
    相似文献
    引证文献
引用本文

乐联华 江剑.基于STM32的远程定位与监控终端的设计[J].国外电子测量技术,2015,34(10):67-72

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2015-11-09
  • 出版日期: