边界扫描测试系统的设计与实现
DOI:
作者:
作者单位:

桂林电子科技大学电子工程与自动化学院 桂林 541004

作者简介:

通讯作者:

中图分类号:

TP206+.3

基金项目:


Design and realization of boundary scan testablity system
Author:
Affiliation:

School of Electrical Engineering and Automation,Guilin University of Electronic Technology,Guilin 541004,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解决复杂电路板的测试点少和测试覆盖率低以及传统的测试设备体积大、成本高等问题,IEEE1149.1标准被公布并发展出了边界扫描技术。本设计以边界扫描技术为基础,开发出由测试软件、测试控制器以及目标电路板组成的边界扫描测试系统,并通过对目标板的故障测试,验证了该系统满足完整性测试,互联测试的设计要求且对印刷电路板(PCB)和集成电路(IC)制造和使用过程中出现的桥接故障和呆滞故障有良好的故障诊断、定位功能。

    Abstract:

    To solve some problems like the lacking test points and the low level of test coverage of the complex PCB,IEEE1149.1 was published and developed a new technology,namely boundary scan.Thetestablity system is based on boundary scan technology andconsists of the test software and the test controller and the targetcircuit board.At last, the test result which the testablity system did fault test of the unit under test(UUT) has indicated that the systemmeets design requirements of capture test and interconnection test, and has ability to diagnose and position bridge fault and stuckat fault.

    参考文献
    相似文献
    引证文献
引用本文

颜学龙,贾银涛.边界扫描测试系统的设计与实现[J].国外电子测量技术,2016,35(6):82-85

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2016-07-08
  • 出版日期: