气压测高仪的设计与实现
DOI:
作者:
作者单位:

1. 中国科学院国家授时中心 西安 710600;2. 中国科学院精密导航定位与定时技术重点实验室 西安 710600;3. 中国科学院大学 北京 100190

作者简介:

通讯作者:

中图分类号:

TN98

基金项目:


Design and implementation of barometric altimeter
Author:
Affiliation:

1.National Time Service Centre,Chinese Academy of Sciences,Xi’an 710600,China; 2. Key Laboratory of Precision Navigation Positioning and Timing,Chinese Academy of Sciences,Xi’an 710600,China; 3. University of the Chinese Academy of Sciences,Beijing 100190,China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了解决车辆在多遮挡环境下难以定位的问题,研制了一款适用于辅助车载接收机定位的高精度气压测高仪。该气压测高仪可以辅助导航接收机在3颗可视卫星的情况下进行导航定位,并提高垂直方向的定位精度。气压测高仪由微控制器STM32控制压力传感器MS5534C采集大气压力和温度,并通过串口将数据向上位机传输。最后通过两个对比实验验证气压测高仪性能。实验结果表明:气压测高仪测得高度的分辨率为1 m,在海拔500 m处,高度均方根误差为0.81 m,可满足辅助车载定位的需求。

    Abstract:

    This article developed a barometric altimeter with high precision to solve the problem that it is difficult for vehicles positioning in multiple occlusion environments. The GNSS receiver can achieve navigation and positioning in the case of three visible satellites and improve positioning accuracy in the vertical direction aided by the barometric altimeter. Barometric altimeter is controlled by microcontroller STM32, by using pressure sensor to collect the atmospheric pressure and temperature, and sent data to the host computer using a serial port. The benefit of barometric altimeter is demonstrated with the two contrast experiments. The experimental results show that the height resolution measured by the barometric altimeter is 1 m and the RMSE of the height is 0.81 m at 500 m altitude, and satisfy the requirements of vehicles positioning.

    参考文献
    相似文献
    引证文献
引用本文

李博,李孝辉.气压测高仪的设计与实现[J].国外电子测量技术,2017,36(1):53-56

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-03-13
  • 出版日期: