涂膜机单片机控制及其人机界面研究
DOI:
作者:
作者单位:

1. 中国钢研科技集团有限公司 安泰环境工程技术有限公司 北京 100081; 2. 河北工业大学控制科学与工程学院 天津 300132

作者简介:

通讯作者:

中图分类号:

TN2

基金项目:


Research on single chip microcomputer control and humanmachine interface of coating machine
Author:
Affiliation:

1. AT&M Environmental Engineering Technology Co., Ltd, China Iron & Steel Research Institute Group, Beijing 100081, China; 2. College of Control Science and Engineering,Hebei University of Technology, Tianjin 300132, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对涂膜机平稳性低和痕迹均匀性等问题,以AT89S52微控制器为核心,同时由步进电机、压机、传感器和人机界面等部件组成。软件Keil4为开发环境,使用C语言开发。硬件以Altium Designer Summer 09开发环境,设计原理图和PCB。按照系统模块化设计,分别对每一个模块进行测试、处理及分析,最后对全部模块集合起来进行调试和实验。实验实现步进电机控制,实现涂膜机速度控制的稳定。通过实验研究,完成涂膜机的运动控制和显示,同时涂膜机提高了30%的准确度,可靠性达40%,从根本上解决了涂膜机的问题。

    Abstract:

    This paper introduces the principle of coating machine, the system to AT89S52 microcontroller as the core, stepper motor, press the body, sensors and manmachine interface and other peripheral components. Software to Keil4 for the development environment, the use of C language development. Hardware to Altium Designer Summer 09 for the development environment, design schematics and PCB. Hardware and software design, the realization of stepper motor control, to achieve the stability of the coating machine speed control. Through the experimental study, to complete the coating machine motion control and display, while the coating machine to improve the accuracy of 30%, 40% reliability, fundamentally solve the problem of coating machine.

    参考文献
    相似文献
    引证文献
引用本文

刘永刚,吕书豪.涂膜机单片机控制及其人机界面研究[J].国外电子测量技术,2017,36(8):88-92

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2017-09-11
  • 出版日期: